Edited by: E. Peek and G. Van Weert
Chloride Metallurgy 2002 provides an academic, engineering and/or
production point of view on topics such as lixiviant regeneration (HCl, Cl2)
through pyrohydrolysis or (membrane) electrolysis, engineering design aspects
of fluid bed and spray roaster pyrohydrolysers, energy recovery in chloride
systems (HCl, Cl2 gas streams), formation and handling of dioxins and furans,
high temperature chlorination of Ti/Zr minerals and base metal sulphides,
chlorides in autoclave leaching of both sulphide and oxide ores (laterites),
solvent extraction and electrowinning in chloride solutions and molten salts,
chloride challenges in treating secondary raw materials and chloride hydrometallurgy
for Cu, Ni, Ag, Ca, Fe, PGM's.
Volume I: PGM's, Au and Ag; Environment and Technology Development; Materials of
Construction; Pyrometallurgy - Fundamentals of Chlorination; Sulphide Hydrometallurgy/
Pyrometallurgy and Laterites - View Table of Contents
October 2002, 400 pages, hardcover. ISBN: 1-894475-28-3
Volume II: Titanium; Solvent Extraction; Calcium; Copper and Zinc; Pyrohydrolysis
and Iron Control/Recycling - View Table of Contents
October 2002, 415 pages, hardcover. ISBN: 1-894475-28-3
Photocopies available at $0.75 per page plus a small service fee.
| 
MetSoc Home
How to Order